📦 110.000+ Ürün Çeşidi 🌍 40+ Global Marka 🚚 Bugün Kargoda 💳 Peşin Fiyatına 6 Taksit 🛠️ Canlı Teknik Destek 🔒 %100 Orijinal Ürün

Schneider

Schneider LXM26DU07M3X 750W denetleyici servo sürücü

Name: Schneider LXM26DU07M3X 750W denetleyici servo sürücü
Brand: Schneider
SKU: LXM26DU07M3X
Price: 6880.95 TRY
Availability: InStock

Ürün Kodu: LXM26DU07M3X

(0)

17.032,33 TL

6.880,95 TL

%60

Daha Fazla Servo Sürücüler

Adet

KoleksiyonFiyat Alarmı

Main
Range of product	Easy Lexium 26
Device short name	LXM26D
Product or component type	Motion servo drive
Format of the drive	Compact housing
Line current	6 A 181.8 % at 220 V, single phase 6 A 160.6 % at 220 V, three phase

Complementary
Network number of phases	Three phase Single phase
[Us] rated supply voltage	220 V (- 10...15 %) for three phase 220 V (- 20...15 %) for single phase
Supply voltage limits	200…255 V three phase 170…255 V single phase
Supply frequency	50/60 Hz - 5...5 %
Network frequency	47.5...63 Hz
Continuous output current	4.5 A at 16 kHz
Output current 3s peak	13.5 A at 220 V
Continuous power	750 W at 220 V
Nominal power	0.75 kW at 220 V 16 kHz
Switching frequency	16 kHz
Overvoltage category	III
Maximum leakage current	1.3 mA
Output voltage	<= power supply voltage
Electrical isolation	Between power and control
Type of cable	Twisted shielded pairs cable (single or double) (temperature: 0…55 °C)
Electrical connection	Spring terminal, clamping capacity: 0.82...1 mm², 18 AWG (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², 18 AWG (R, S, T) Spring terminal, clamping capacity: 0.82...1 mm², 18 AWG (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², 18 AWG (PA/+, PBe)
Tightening torque	PE (ground): 1.4 N.m
Discrete input number	8 programmable (CN1) 1 pulse train input (PTI) (CN1) 2 fast capture (CN1)
Discrete input voltage	24 V DC for logic
Discrete input logic	Positive or negative (CN1)
Discrete output number	1 5
Discrete output type	Logic (CN1) at 12...24 V DC Pulse train output (PTO) (CN1)
Discrete output voltage	12...24 V DC
Discrete output logic	Positive or negative (CN1)
Analogue input number	2
Absolute accuracy error	0.1 %
Analogue input type	V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm, resolution: 12 bits T_REF voltage analog input
Control signal type	Servo motor encoder feedback CN2
Protection type	Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor
Physical interface	RS485 for Modbus Serial line slave
Status LED	1 LED (red) charge
Signalling function	Servo status and fault codes five 7-segment display units
Marking	CULus CE
Type of cooling	Integrated fan
Operating position	Vertical
Product compatibility	Servo motor BCH2 (130 mm, 1 motor stacks) Servo motor BCH2 (80 mm, 2 motor stacks)
Width	55 mm
Height	150 mm
Depth	146 mm
Net weight	1 kg

Environment
EMC filter	Without EMC filter
Electromagnetic compatibility	Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Standards	IEC 61800-5-1
Product certifications	cULus CE
IP degree of protection	IP20
Vibration resistance	3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance	10 gn, type I conforming to IEC 60068-2-27
Relative humidity	5…95 % without condensation
Ambient air temperature for operation	0…55 °C
Ambient air temperature for storage	-25…65 °C
Operating altitude	<= 1000 m without derating > 1000...2000 m 1 % per 100 m

Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.56 cm
Package 1 Width	22.879 cm
Package 1 Length	23.647 cm
Package 1 Weight	1.3 kg
Unit Type of Package 2	S03
Number of Units in Package 2	5
Package 2 Height	30.0 cm
Package 2 Width	29.9 cm
Package 2 Length	39.8 cm
Package 2 Weight	7.131 kg